Introduction:
The HDMI Repeater extends the length of any HDMI cable by regenerating the HDMI signal before it sends the outputs to the HDMI monitor or projector.
The HDMI Repeater will clean out the digital noise (sparkles) in your picture. The input of the HDMI repeater is connected with a long HDMI (male to male) cable from the HDMI device like DVD player or Satellite set top box with a HDMI output port.
The HDMI repeater output is connected to a second HDMI (male to male) cable to go from the output to any HDMI display or projector with a HDMI connector. The box is placed near the display to remove any noise that has been generated by a long HDMI cable.
Features:
This kind of the HDMI Repeater has many features that enable it to perform in a superior manner. Among those features you will find:
Connects HDMI DVD or devices with HDMI outputs to HDMI compatible displays or projectors.
Allows to extend the HDMI cable distance, between the HDMI player and HDMI TV set,
Maintains highest HDMI single link video resolution 1080p
Supports DDWG standard for HDMI compliant monitors
Supports full HDMI audio and video
HDCP Compliant
Installs in minutes
SPECIFICATIONS:
|
Signal Inputs/Output
|
|
|
Input Video Signal
|
5 Volts p-p (TTL)
|
|
Maximum Single Link Range
|
1920X1200, 1080P
|
|
Output Video
|
HDMI1.2a+HDCP1.0/1.1
|
|
HDMI Input/Output Connector
|
Type A 19 pin
|
|
Video format supported
|
|
|
VGA
|
640x480,800x600,1024x768,1920x1200
|
|
DTV/HDTV
|
480i/576i/480p/576p/720p/1080i/1080P
|
|
Digital Signal I/O
|
|
|
HDMI Compliance
|
HDMI 1.2a
|
|
Operating Frequency
|
|
|
Video Amplifier Bandwidth
|
1.65Gbps/165MHz
|
|
Resolutions(HDTV)
|
|
